Countersinks – POLLEDRI SRL

ANTIVIBRATIONS COUNTERSINKS, variable pitch

Polledri Srl

New range of 3-flutes 90° POLLEDRI’S Countersinks with ASYMMETRIC GEOMETRY OF THE CUTTERS These POLLEDRI’S Countersinks, thanks to their asymmetric cutting geometry that reduces axial force compared to traditional one, guarantee a significant reduction in vibrations, and a consequent better finish of the flaring. Their rectified angle at 20 ° and at constant value, guarantees […]

MULTI-FUNCTION TOOLS

Polledri Srl

– Multifunction Tools in H.M. K15 1800 HV micrograin, also with AlTiCN coating to perform up to 10 types of machining with a single tool: Centering, Drilling, Longitudinal chamfers, Countersinking, Screw seats, “V” grooves, Contouring, Engravings and Interpolation machining. – Multifunction Bi-Conical Countersinks in H.M. K15 1800 HV also with AlTiCN coating, for traction and […]

Pipes Deburrers inter/exter Polledri

Polledri Srl

Pipes Deburrers Inter/Exter 3 Flutes in HSS-E. 90° Cylindrical Shank. TYPE 01: Exter: 5,2-13,5 | Inter: 2,0-11,0 TYPE 02: Exter: 12,2-30,0 | Inter: 10,0-31,0 TYPE 03: Exter: 18,0-48,0 | Inter: 20,0-50,0

Deburring Tool with hole Polledri

Polledri Srl

Deburring Tool with hole HSS 5%CO. 63 HRC. 90 ° and 60 ° cylindrical shank and Morse Taper. From Diam. 10 to Diam. 50 The deburring tool “with hole” is more particulary designed for countersink, for the execution of little chamfer,and for use with light metals and plastics. The surface obtained is smooth and without […]

3 Flutes countersinks polledri

Polledri Srl

3 Flutes Countersinks in HSS 5%CO. 63 HRC or carbide K.15. 90 °, 60 °, 100 °, 120 ° cylindrical shank and morse taper. From Diam. 4.3 to Diam. 100. They are suitable to perform rabbets on all materials. They can also be used for bevels, having the care to reduce the values of both […]