Deburring Tools – POLLEDRI SRL

HAND DEBURRING SYSTEM

Polledri Srl

The POLLEDRI’S hand deburring systemis composed of a universal handle that can accommodate 3 different chucks:a threaded chuck for deburrs or rotative deburrs, a chuck for scraper blades or a reversible chuck for blades. It’s possible to combine these toolholder with: External deburrs and rotary deburrs, scrapers or 2.6 and 3.2 replacement blades. This system […]

Countersinks for taps Polledri

Polledri Srl

This tool permit threading and bevelling in one operation. The countersink for tap is formed from 3 parts: one ring, one spring and one head. The ring is fixed with 2 screws at 90° degree on the shank of the tap in the correct position, so that when the tool work the spring is not […]

Countersinks for drill Polledri

Polledri Srl

The Polledri countersink for drill permits you to drill and countersink simultaneous. The drill countersink adapts to most standard twist drills within the range from Ø 3 to Ø 30. Fixed on the drill by two screw on its back

Deburring Tool with hole Polledri

Polledri Srl

Deburring Tool with hole HSS 5%CO. 63 HRC. 90 ° and 60 ° cylindrical shank and Morse Taper. From Diam. 10 to Diam. 50 The deburring tool “with hole” is more particulary designed for countersink, for the execution of little chamfer,and for use with light metals and plastics. The surface obtained is smooth and without […]