Catalogue

1 Flute chamfering cutters 60° HSS 5% Co

1 Flute chamfering cutters 60° HSS 5% Co

Greater countersinking capacity from the point to the outside diameter (up to Ø 30 mm). Simultaneous drilling and countersinking on thin elements (laminates, aluminium, wood). Constant finish-grind profile makes it possible to obtain a great many easy regrinds : a mere touch of the grinder to the tooth is sufficient. We recommend lubricating.

1 Flute chamfering cutters 60° HSS 5% Co Morse Taper Shank

1 Flute chamfering cutters 60° HSS 5% Co Morse Taper Shank

Greater countersinking capacity from the point to the outside diameter (up to Ø 30 mm). Simultaneous drilling and countersinking on thin elements (laminates, aluminium, wood). Constant finish-grind profile makes it possible to obtain a great many easy regrinds : a mere touch of the grinder to the tooth is sufficient. We recommend lubricating.

1 Flute chamfering cutters 90° HSS 5% Co

1 Flute chamfering cutters 90° HSS 5% Co

Greater countersinking capacity from the point to the outside diameter (up to Ø 30 mm). Simultaneous drilling and countersinking on thin elements (laminates, aluminium, wood). Constant finish-grind profile makes it possible to obtain a great many easy regrinds : a mere touch of the grinder to the tooth is sufficient. We recommend lubricating.

1 Flute chamfering cutters 90° HSS 5% Co Morse Taper Shank

1 Flute chamfering cutters 90° HSS 5% Co Morse Taper Shank

Greater countersinking capacity from the point to the outside diameter (up to Ø 50 mm). Simultaneous drilling and countersinking on thin elements (laminates, aluminium, wood). Constant finish-grind profile makes it possible to obtain a great many easy regrinds : a mere touch of the grinder to the tooth is sufficient. We recommend lubricating.

Arbors for back spot facing cutters GR.14

ARBORS FOR BACK SPOTFACING CUTTER GR.14 from Ø 14 to Ø 21

The arbors specially devised for our back-spotfacing cutters, have a threaded hole at the end of the taper to allow the locking of the arbor to the machine by means of a drawbar. Alternatively, they can be used with the tang end and locked to the machine with the positioning slot if available. M.T. 3 with locking slot DIN 1806

Arbors for back spot facing cutters GR.20

ARBORS FOR BACK SPOTFACING CUTTER GR.20 from Ø 20 to Ø 32

The arbors specially devised for our back-spotfacing cutters, have a threaded hole at the end of the taper to allow the locking of the arbor to the machine by means of a drawbar. Alternatively, they can be used with the tang end and locked to the machine with the positioning slot if available. M.T 3 (up to Ø 24) and M.T. 4 (from Ø 25) with locking slot DIN 1806

Arbors for back spot facing cutters GR.30

ARBORS FOR BACK SPOTFACING CUTTER GR.30 from Ø 30 to Ø 46

The arbors specially devised for our back-spotfacing cutters, have a threaded hole at the end of the taper to allow the locking of the arbor to the machine by means of a drawbar. Alternatively, they can be used with the tang end and locked to the machine with the positioning slot if available. M.T 4 with locking slot DIN 1806.

Arbors for back spot facing cutters GR.40

ARBORS FOR BACK SPOTFACING CUTTER GR.40 from Ø 40 to Ø 62

The arbors specially devised for our back-spotfacing cutters, have a threaded hole at the end of the taper to allow the locking of the arbor to the machine by means of a drawbar. Alternatively, they can be used with the tang end and locked to the machine with the positioning slot if available. M.T 5 with locking slot DIN 1806.

Arbors for back spot facing cutters GR.6

ARBORS FOR BACK SPOTFACING CUTTER GR.6 from Ø 6 to Ø 10

The arbors specially devised for our back-spotfacing cutters, have a threaded hole at the end of the taper to allow the locking of the arbor to the machine by means of a drawbar. Alternatively, they can be used with the tang end and locked to the machine with the positioning slot if available. M.T. 1 with no locking slot.

Arbors for back spot facing cutters GR.9

ARBORS FOR BACK SPOTFACING CUTTER GR.9 from Ø 9 to Ø 15

The arbors specially devised for our back-spotfacing cutters, have a threaded hole at the end of the taper to allow the locking of the arbor to the machine by means of a drawbar. Alternatively, they can be used with the tang end and locked to the machine with the positioning slot if available. M.T. 2 with no locking slot.

Back and Forward Spotfacing cutter 30/M.D. Hard Metal ISO K30

BACK AND FORWARD SPOTFACING CUTTER in HARD METAL ISO K 30 from Ø 60 to Ø 80

You can fit them on all the Polledri arbors of the same group. You can connect them on the arbors quickly because they have an special quick change bayonet system. Using a good soluble oil you can increase the speed with an increase of the tool life. Can also be used for forward spotfacing operations.

Back and Forward Spotfacing cutter 40/M.D. Hard Metal ISO K30

BACK AND FORWARD SPOTFACING CUTTER in HARD METAL ISO K 30 from Ø 82 to Ø 125

You can fit them on all the Polledri arbors of the same group. You can connect them on the arbors quickly because they have an special quick change bayonet system. Using a good soluble oil you can increase the speed with an increase of the tool life. Can also be used for forward spotfacing operations.

Back and Forward Spotfacing cutters type 30/C HSS

Back and Forward Spotfacing cutters in HSS HRC 63 From Ø 60 to Ø 80

You can fit them on all the Polledri arbors of the same group. You can connect them on the arbors quickly because they have an special quick change bayonet system. Using a good soluble oil you can increase the speed with an increase of the tool life. Can also be used for forward spotfacing operations.

Back and Forward Spotfacing cutters type 40/C HSS

Back and Forward Spotfacing cutters in HSS HRC 63 From Ø 82 to Ø 125

You can fit them on all the Polledri arbors of the same group. You can connect them on the arbors quickly because they have an special quick change bayonet system. Using a good soluble oil you can increase the speed with an increase of the tool life. Can also be used for forward spotfacing operations.

Back Spotfacing cutter 20/M.D. Hard Metal ISO K30

BACK SPOTFACING CUTTER in HARD METAL ISO K 30 from Ø 33 to Ø 60

You can fit them on all the Polledri arbors of the same group. You can connect them on the arbors quickly because they have an special quick change bayonet system. Using a good soluble oil you can increase the speed with an increase of the tool life.

Back Spotfacing cutter 14/M.D. Hard Metal ISO K30

BACK SPOTFACING CUTTER in HARD METAL ISO K 30 from Ø 24 to Ø 41

You can fit them on all the Polledri arbors of the same group. You can connect them on the arbors quickly because they have an special quick change bayonet system. Using a good soluble oil you can increase the speed with an increase of the tool life.

Back Spotfacing cutter 6/M.D. Hard Metal ISO K30

BACK SPOTFACING CUTTER in HARD METAL ISO K 30 from Ø 12 to Ø 22

You can fit them on all the Polledri arbors of the same group. You can connect them on the arbors quickly because they have an special quick change bayonet system. Using a good soluble oil you can increase the speed with an increase of the tool life.

Back Spotfacing cutter 9/M.D. Hard Metal ISO K30

BACK SPOTFACING CUTTER in HARD METAL ISO K 30 from Ø 16 to Ø 34

You can fit them on all the Polledri arbors of the same group. You can connect them on the arbors quickly because they have an special quick change bayonet system. Using a good soluble oil you can increase the speed with an increase of the tool life.

Back Spotfacing cutters type 14/C HSS

Back Spotfacing cutters in HSS HRC 63 From Ø 25 to Ø 41

You can fit them on all the Polledri arbors of the same group. You can connect them on the arbors quickly because they have an special quick change bayonet system. Using a good soluble oil you can increase the speed with an increase of the tool life.

Back Spotfacing cutters type 20/C HSS

Back Spotfacing cutters in HSS HRC 63 From Ø 34 to Ø 60

You can fit them on all the Polledri arbors of the same group. You can connect them on the arbors quickly because they have an special quick change bayonet system. Using a good soluble oil you can increase the speed with an increase of the tool life.

Back Spotfacing cutters type 6/C HSS

Back Spotfacing cutters in HSS HRC 63 From Ø 12 to Ø 26.

You can fit them on all the Polledri arbors of the same group. You can connect them on the arbors quickly because they have an special quick change bayonet system. Using a good soluble oil you can increase the speed with an increase of the tool life.

Back Spotfacing cutters type 9/C HSS

Back Spotfacing cutters in HSS HRC 63 From Ø 16 to Ø 34.

You can fit them on all the Polledri arbors of the same group. You can connect them on the arbors quickly because they have an special quick change bayonet system. Using a good soluble oil you can increase the speed with an increase of the tool life.

Conical Drills

CONICAL DRILLS IN HSS

Capacity: From Ø 3 to Ø 53

This tool have been built to drill flat materials of thickness till 2mm and pipes till thickness 3mm. With each tool a large range of holes can be produced on every kind of material without pre drilling.

Counterbores 2 flutes HSS type 0W

Counterbores with 2 flutes in HSS HRC 63 from Ø 7 to Ø 16,5.

You can fit them in all the Polledri mandrels of the same group. With rotatory pilots or drills you can execute simultaneous operations. We advise them for materials with long and normal chip.

Counterbores 2 flutes HSS type 2W

COUNTERBORES WITH 2 FLUTES in HSS HRC 63 from Ø 10 to Ø 25.

You can fit them in all the Polledri mandrels of the same group. With rotatory pilots or drills you can execute simultaneous operations. We advise them for materials with long and normal chip.

Counterbores 2 flutes type 0HI

Counterbores 2 flutes With interchangeable insert in H.M. CP30 from Ø 18 to Ø 23

You con fit them in all the Polledri's mandrels of the same group. With fixed or rotating pilots, or drills, you can execute simultaneous operations. We advise them for materials with high hardness, cast iron and steel, if you have an high power machine. You can use high feeds because the two inserts are concentric, for this the chip is distributed equally.

Counterbores 2 flutes type 1HI

Counterbores 2 flutes With interchangeable insert in M.D. CP30 from Ø 24 to Ø 33

You con fit them in all the Polledri's mandrels of the same group. With fixed or rotating pilots, or drills, you can execute simultaneous operations. We advise them for materials with high hardness, cast iron and steel, if you have an high power machine. You can use high feeds because the two inserts are concentric, for this the chip is distributed equally.

Counterbores 2 flutes type 2HI

Counterbores 2 flutes With interchangeable insert in M.D. CP30 from Ø 34 to Ø 60

You con fit them in all the Polledri's mandrels of the same group. With fixed or rotating pilots, or drills, you can execute simultaneous operations. We advise them for materials with high hardness, cast iron and steel, if you have an high power machine. You can use high feeds because the two inserts are concentric, for this the chip is distributed equally.

Counterbores 3 Flutes Hard Metal type 0H

Counterbores with 3 flutes in Hard Metal ISO K30 from Ø 10 to Ø 24

You can fit them in all the Polledri mandrels of the same group. These counterbores are manufactured to solve all the problems of counterboring head screw and spot facing on cast iron, bronze, etc. With rotatory pilots or drills you can execute simultaneous operations.

Counterbores 3 flutes Hard Metal type 1H

COUNTERBORES WITH 3 FLUTES in Hard Metal ISO K30 from Ø 12 to Ø 40.

You can fit them in all the Polledri mandrels of the same group. These counterbores are manufactured to solve all the problems of counterboring head screw and spot facing on cast iron, bronze, etc. With rotatory pilots or drills you can execute simultaneous operations.