Countersinks @en

1 Flute chamfering cutters 60° HSS 5% Co

1 Flute chamfering cutters 60° HSS 5% Co

Greater countersinking capacity from the point to the outside diameter (up to Ø 30 mm). Simultaneous drilling and countersinking on thin elements (laminates, aluminium, wood). Constant finish-grind profile makes it possible to obtain a great many easy regrinds : a mere touch of the grinder to the tooth is sufficient. We recommend lubricating.

1 Flute chamfering cutters 60° HSS 5% Co Morse Taper Shank

1 Flute chamfering cutters 60° HSS 5% Co Morse Taper Shank

Greater countersinking capacity from the point to the outside diameter (up to Ø 30 mm). Simultaneous drilling and countersinking on thin elements (laminates, aluminium, wood). Constant finish-grind profile makes it possible to obtain a great many easy regrinds : a mere touch of the grinder to the tooth is sufficient. We recommend lubricating.

1 Flute chamfering cutters 90° HSS 5% Co

1 Flute chamfering cutters 90° HSS 5% Co

Greater countersinking capacity from the point to the outside diameter (up to Ø 30 mm). Simultaneous drilling and countersinking on thin elements (laminates, aluminium, wood). Constant finish-grind profile makes it possible to obtain a great many easy regrinds : a mere touch of the grinder to the tooth is sufficient. We recommend lubricating.

1 Flute chamfering cutters 90° HSS 5% Co Morse Taper Shank

1 Flute chamfering cutters 90° HSS 5% Co Morse Taper Shank

Greater countersinking capacity from the point to the outside diameter (up to Ø 50 mm). Simultaneous drilling and countersinking on thin elements (laminates, aluminium, wood). Constant finish-grind profile makes it possible to obtain a great many easy regrinds : a mere touch of the grinder to the tooth is sufficient. We recommend lubricating.

Deburring Tools with hole 60° HSS 5% Co

Deburring Tools with hole 60° HSS 5% Co Straight Shank

The deburring tool "with hole" is more particulary designed for countersinking, for the execution of little chamfer,and for use with light metals and plastics.The surface obtained is smooth and without burrs. We recommend lubricating.

Deburring Tools with hole 60° HSS 5% Co Morse Taper Shank

Deburring Tools with hole 60° HSS 5% Co Morse Taper Shank

The deburring tool "with hole" is more particulary designed for countersinking, for the execution of little chamfer,and for use with light metals and plastics.The surface obtained is smooth and without burrs. We recommend lubricating.

Deburring Tools with hole 90° HSS 5% Co Morse Taper Shank

Deburring Tools with hole 90° HSS 5% Co Morse Taper Shank

The deburring tool "with hole" is more particulary designed for countersinking, for the execution of little chamfer,and for use with light metals and plastics.The surface obtained is smooth and without burrs. We recommend lubricating.

Deburring Tools with hole 90° HSS 5% Co Straight Shank

Deburring Tools with hole 90° HSS 5% Co Straight Shank

The deburring tool "with hole" is more particulary designed for countersinking, for the execution of little chamfer,and for use with light metals and plastics.The surface obtained is smooth and without burrs. We recommend lubricating.

Pipes deburrers 3 flutes 90° HSS-E centering guide

PIPES DEBURRERS 3 FLUTES 90° in HSS-E (Centering Guide Only!)

For tubes from Ø 6,2 to Ø 14,2.

The centering guide, allows to locate in the axis small tubes, handly held

Pipes deburrers 3 flutes 90° HSS-E exter

PIPES DEBURRERS 3 FLUTES 90° in HSS-E (Exter Countersink Only!)

Capacity: From Ø 5,2 to Ø 48.

Using of the exter cutter alone, to chamfer bar ends

Pipes deburrers 3 flutes 90° HSS-E inter

PIPES DEBURRERS 3 FLUTES 90° in HSS-E (Inter Countersink Only!)

Capacity: From Ø 2,0 to Ø 50.

Two cutters simultaneously used, to produce inter-exter chamfers in tubes

Svasatori 3 tagli 90° DIN 335-C HSS

SVASATORI 3 TAGLI 90° in HSS HRC 63

Dal Ø 6,3 al Ø 31 per eseguire svasature a 90° da M3 a M16 su quasi tutti i materiali.

Gli svasatori a 3 tagli a 90° sono indicati per eseguire sia sbavature che svasature.

Tra gli altri usi, sono particolarmente indicati per realizzare le sedi per la testa delle viti.

Gli svasatori a tre taglienti HSS, sono realizzati esclusivamente secondo lo standard internazionale DIN 335.

Consigliati per produzioni non intensive.

Svasatori 3 tagli 90° DIN 335-C HSS-E 8% Cobalto + AlTiCN

SVASATORI 3 TAGLI 90° in HSS-E HRC 65
8% Co. con Rivestimento AlTiCN

Da 6,3 a Ø 31 per eseguire svasature a 90° da M3 a M16

Gli svasatori a tre taglienti AlTiCN, sono consigliati per lavorazioni molto intensive, su materiali solitamente difficili da lavorare come leghe dure e/o abrasive

Three flutes countersinks 100° HSS 5% Co

Three flutes countersinks 100° HSS 5% Co.

Grooves opened wide to allow chips a way out, high positive cut, costant profile relief (a great many regrinds), work without vibrations.We reccomend lubricating

Three flutes countersinks 120° HSS 5% Co

Three flutes countersinks 120° HSS 5% Co.

Grooves opened wide to allow chips a way out, high positive cut, costant profile relief (a great many regrinds), work without vibrations.We reccomend lubricating

Three flutes countersinks 60° HSS 5% Co

Three flutes countersinks 60° HSS 5% Co.

Grooves opened wide to allow chips a way out, high positive cut, costant profile relief (a great many regrinds), work without vibrations.We reccomend lubricating

Three flutes countersinks 60° HSS 5% Co Morse Taper Shank

Three flutes countersinks 60° HSS 5% Co. Morse Taper Shank

Grooves opened wide to allow chips a way out, high positive cut, costant profile relief (a great many regrinds), work without vibrations.We reccomend lubricating

Three flutes countersinks 60° HSS 5% Co TiN coated

Three flutes countersinks 60°

The TiN (Titanium nitride) coating, which has always been fascinating due to its shiny golden colour, was the first PVD coating to be used successfully in the industrial field. It is applied to chip-removing cutting tools.

Although over of the years research has made it possible to develop more complex coatings, TiN remains a very modern product and has a high performance in many fields.

Grooves opened wide to allow chips a way out, high positive cut, costant profile relief (a great many regrinds), work without vibrations.We reccomend lubricating

Three flutes countersinks 60° Solid Carbide K15

Three flutes countersinks Solid Carbide K15

Grooves opened wide to allow chips a way out, high positive cut, costant profile relief (a great many regrinds), work without vibrations.We reccomend lubricating

Three flutes countersinks 90° DIN 335-C K15 Solid Carbide

Three flutes countersinks Solid Carbide K15

Grooves opened wide to allow chips a way out, high positive cut, costant profile relief (a great many regrinds), work without vibrations.We reccomend lubricating

Three flutes countersinks 90° HSS 5% Co DIN 335-C

Three flutes countersinks 90° DIN 335-C

Grooves opened wide to allow chips a way out, high positive cut, costant profile relief (a great many regrinds), work without vibrations.We reccomend lubricating

Three flutes countersinks 90° HSS 5% Co DIN 335-C TiAlN coated

Three flutes countersinks 90° DIN 335-C TiAlN coated

Three flutes Countersink TiAlN coated, undergo a surface treatment to titanium nitride and aluminum that gives them special anti-friction and anti-friction properties and ensures less clogging of the cutting edges.

This feature makes it the best choice for the machining of non-ferrous metals, as well as abrasive materials and kneading.

They are also able to withstand very high processing temperatures (up to 800 °).

Its excellent thermal and chemical resistance allows for dry cutting and improvements in the performance of components subjected to high stresses. The high hardness of the coating provides excellent protection against abrasive wear and erosion.

Recommended Applications: Use dry.

Three flutes countersinks 90° HSS 5% Co DIN 335-C TiN coated

Three flutes countersinks 90° DIN 335-C TiN coated

The TiN (Titanium nitride) coating, which has always been fascinating due to its shiny golden colour, was the first PVD coating to be used successfully in the industrial field. It is applied to chip-removing cutting tools.

Although over of the years research has made it possible to develop more complex coatings, TiN remains a very modern product and has a high performance in many fields.

Grooves opened wide to allow chips a way out, high positive cut, costant profile relief (a great many regrinds), work without vibrations.We reccomend lubricating

Three flutes countersinks 90° HSS 5% Co Long Type

Three flutes countersinks 90° Long Type

Grooves opened wide to allow chips a way out, high positive cut, costant profile relief (a great many regrinds), work without vibrations.We reccomend lubricating

Three flutes countersinks 90° HSS 5% Co Morse Taper Shank

Three flutes countersinks 90° HSS 5% Co. Morse Taper Shank

Grooves opened wide to allow chips a way out, high positive cut, costant profile relief (a great many regrinds), work without vibrations.We reccomend lubricating

Three flutes countersinks 90° HSS 5% Co Morse Taper Shank TiAlN coated

Three flutes countersinks 90° Morse Taper Shank TiAlN coated

Three flutes Countersink TiAlN coated, undergo a surface treatment to titanium nitride and aluminum that gives them special anti-friction and anti-friction properties and ensures less clogging of the cutting edges.

This feature makes it the best choice for the machining of non-ferrous metals, as well as abrasive materials and kneading.

They are also able to withstand very high processing temperatures (up to 800 °).

Its excellent thermal and chemical resistance allows for dry cutting and improvements in the performance of components subjected to high stresses. The high hardness of the coating provides excellent protection against abrasive wear and erosion.

Recommended Applications: Use dry.

Three flutes countersinks 90° HSS 5% Co Morse Taper Shank TiN coated

Three flutes countersinks 90° Morse Taper Shank TiN coated

The TiN (Titanium nitride) coating, which has always been fascinating due to its shiny golden colour, was the first PVD coating to be used successfully in the industrial field. It is applied to chip-removing cutting tools.

Although over of the years research has made it possible to develop more complex coatings, TiN remains a very modern product and has a high performance in many fields.

Grooves opened wide to allow chips a way out, high positive cut, costant profile relief (a great many regrinds), work without vibrations.We reccomend lubricating

Three flutes hand countersinks 90° HSS 5% Co

Three flutes hand countersinks 90° HSS 5% Co.

From M6 To M12